Michael's Forest River Coachman Clipper Travel Trailer

This beautiful light weight trailer awaits your next adventure. It’s easy to pull with a SUV or truck. It has a plugin Curt brake controller preset to 50% vehicle and 50% trailer, but can be operated to your preference via cell phone app called “OneControl Auto”. It’s just been plugged into your vehicle and the trailer wiring just plugs into it. Trailer hitch on the tow vehicle is attached with a stabilizer system, which makes up for a smoother ride. There can be a bike rack installed in the front of the trailer, about where the propane tank and battery lives. The front window is covered by a protective plastic, to prevent damage from rocks, it can be opened if desired. At the main entrance a step can be folded down for easy access. Above the door there can be the awning extended, you can leave the legs attached to the trailer, or they can be put on the ground as well. In order to extend the awning, there’s a withe metal hook in the storage compartment. Step 1.) Select the aluminum lever attached on the right hand side of the awning down with the hock. Step 2.) release the 2 locks on both side of the legs by pinching them together on both legs, they’re about chest height Step 3.) loosen the wheels on both legs Step 4.) pull the strap all the way down Step 5.) extent the legs by lifting the handles up located on the bottom of the legs. Ideally you need to do that with a second person simultaneously, or in steps, one side first and than the other side, alternate sides, you cannot extend all the way at once, the mechanism will break Step 6.) if desired detach the legs to put them on the ground and extend as desired (you need to maintain a slope away from the trailer in case it’s raining) In windy conditions, the awning must be closed to avoid damage. To retract the awning reverse all the previous steps, but hold on to the strap when selecting the aluminum lever to up and let the awning slowly and controlled retract on its own. FYI, the bunk beds are 6’ x 28” and the dinette bed is measuring 5’ 8” x 32”.